UPF Configuration

Below you may find some of the upf override configuration.

Bess default values can be found here

UPF Address Pool

Below config is basic minimal config which has UE address pool configuration .. code-block:

config:
  upf:
    cfgFiles:
      upf.jsonc:
        mode: af_packet  #this mode means no dpdk
        hwcksum: true
        log_level: "trace"
        gtppsc: true #extension header is enabled in 5G. Sending QFI in pdu session extension header
        measure_upf: false #enable packet processing time
        cpiface:
          dnn: "internet" #keep it matching with Slice dnn
          hostname: "upf"
          #http_port: "8080"
          enable_ue_ip_alloc: true # if true then it means UPF allocates address from below pool
          ue_ip_pool: "172.250.0.0/16" # UE ip pool is used if enable_ue_ip_alloc is set to true

Slice rate Configuration

config:
  upf:
    cfgFiles:
      upf.jsonc:
        # Default global rate limits. Can be changed at runtime via BESS gRPC.
        slice_rate_limit_config:
          # Uplink
          n6_bps: 1000000000 # 1Gbps
          n6_burst_bytes: 12500000 # 10ms * 1Gbps
          # Downlink
          n3_bps: 1000000000 # 1Gbps
          n3_burst_bytes: 12500000 # 10ms * 1Gbps

Note

TBD : add REST api documentation to change slice QoS rates.

UPF Enable dpdk & sriov

config:
  upf:
    # Enable privileged when run from VM with sriov support
    privileged: false
    hugepage:
      enabled: true
    sriov:
      enabled: true
    cniPlugin: vfioveth
    access:
      # Provide sriov resource name when sriov is enabled
      resourceName: "intel.com/intel_sriov_vfio"
    core:
      # Provide sriov resource name when sriov is enabled
      resourceName: "intel.com/intel_sriov_vfio"
    cfgFiles:
      upf.jsonc:
        mode: dpdk